CZ Combination Machine-Electric Die Changing Equipment(Servo motor drive)

Model: 80/120-300 Motorized

一、Forming Machine

1.In-put material: Guiding shaft and guiding rollers

2.Flatten: Up three down four additional two stations guiding and sending,full solid shaft heat treatment with blasting and chroming.

3.Main forming: 18 stations forming (inside 1 station for forming flange, 87-95 degree adjustable), 13 stations CZ change mould, turnover 180 degree to finish the change. Changing the Specification size by means of an electric button.

4.Rib forming: straight rib

5.Straighten: 10 rollers CZ special-use double axis straightening and 4 rollers double axis straightening, total 2 straightening units.

6.Guiding and sending: driven by up and down gears

7.Punch: punch single hole and dual hole after forming, and side hole punchingΦ16×26mm

8.Cut: step-less cutting system, no need change blade, random 80-200 blade piece，extra 200-300 blade 1 piece

二、Control System

1.Main control cabinet: 1 set

2.Change way: (motorized) change model(3pcs of motors: 750w)

3.Change wiring box: 1 piece (installed in the middle of machine)

4.External controller: 1 piece (to control the running direction forward or back during the testing or production manually)

5.Main electrics origin: PLC (Japan Omron), Touch screen (Wuxi Xinje), Relay (Japan Omron), Proximity switch (Korea Autonics), Encoder (Japan Omron)

三、Hydraulic System

1.Hydraulic tank: motor power 5.5kw Tank volume: 200L

2.Maim component origin: magnetic valve Beijing HUADE

四、Driving mode

1. 22KW servo motor+ 5.5KW speed reducer

五、De-coiler

1.Capacity: 5tons

2.Expand way: manual Four link-rod centre out-side expanding

3.Brakes: Spindle double grip

六． Out-put table

1.Length: 3meters 2 pieces

2.Support way: frame is made from channel steel and angle steel, installed roller tubes.

七、Performance parameter

1.Roller material: GCr15 bearing steel

Process art: after CNC lathe processing, make heat treatment up to HRC58-60 degree, then make high precision lathe processing and polished electroplating

2.Main shaft material: 40Cr

Process art: after CNC lathe processing, make heat treatment up to HRC28-32 degree, then make high precision lathe processing and surface polished and chromed

八．product specifications

1.Product specification: 1. C width (75-300mm), Z width (120-300mm) step-less changeable 2. Flange (38-80mm) step-less changeable 3. Edge (10-20mm) 4.Thickness (1.5-3.0mm) changeable

2.Production capacity: high speed 35m/min (depends on punching work frequency)

3.Material: Q195, Q235 hot-rolled black or galvanized steel strips （1.5-3.0mm）

九．Accessories and conditions

Tool: 1 case

Manual: 1 piece

Machine color: main color blue, secondary color gray